NC spotting drill HSS-E 142° N TiAlN
- 112140
- Version
- ≥ ⌀ 6 mm with drive flat to DIN 1835-B.
Precision centred ground point with thin chisel edge - gives easy spot drilling and high accuracy of the centre hole form. Very sturdy due to short flutes.
- Application
- Point angle 142° so that the cutting edges of the following drill engage easily.
- Note
- Use speed for the actual hole ⌀
(not necessarily the speed for the drill outer ⌀).
Specifications
- Coating
- TiAlN
- Tool material
- HSS E
- Standard
- Manufacturer’s standard
- Type
- N
- Tolerance nominal ⌀
- h6
- Point angle
- 142 Grad
- Number of cutting edges Z
- 2
- Through-coolant
- no
- Colour ring
- without
- Type of product
- Spotting drill

Execution and specifications
Show details | Article no. | Shank tolerance | Nominal ⌀ DC | Shank | Flute length Lc | Gross CHF | Qty. | Actions |
---|---|---|---|---|---|---|---|---|
187511 | h6 | 3 mm | DIN 1835 B to h6 | 12 mm | 13.62 | per Piece | ||
187512 | h6 | 4 mm | DIN 1835 B to h6 | 12 mm | 15.51 | per Piece | ||
187513 | h6 | 5 mm | DIN 1835 B to h6 | 15 mm | 16.81 | per Piece | ||
187514 | h6 | 6 mm | DIN 1835 B to h6 | 20 mm | 21.13 | per Piece | ||
187515 | h6 | 8 mm | DIN 1835 B to h6 | 25 mm | 30.70 | per Piece | ||
187516 | h6 | 10 mm | DIN 1835 B to h6 | 25 mm | 37.46 | per Piece | ||
187517 | h6 | 12 mm | DIN 1835 B to h6 | 30 mm | 51.83 | per Piece | ||
187518 | h6 | 16 mm | DIN 1835 B to h6 | 35 mm | 83.67 | per Piece |