Solid carbide milling cutter with internal coolant supply HPC 12 mm

Article no.: 520105

Version: Sturdy roughing end mill without knuckle profile.
With strong core, special chip breaker recesses and large polished flutes.

Application: For roughing milling with high demands on the component surface.

Note: NEW GENERATION AVAILABLE!
Recommended successor product is No. GARANT Master Alu PickPocket solid carbide roughing end mill with through-coolant HPC DLC.

Coating: ZOX
Tool material: Solid carbide
Standard: Manufacturer’s standard
Type: W
Helix angle characteristic: unequal spacing
Spacing of the cutters: unequal spacing
Cutting width ae for milling operation: Full slot cutting depth 1×D – 0.3×D for side milling
Through-coolant: yes
Machining strategy: HPC
Shank tolerance: h6
Colour ring: yellow
Type of product: End / face mill

Execution and specifications

Show details Article no. Cutting edge ⌀ DC Tolerance nominal ⌀ No. of teeth Z Helix angle Gross CHF Qty. Actions

520102

6 mm

109.18

per Piece

520103

8 mm

142.69

per Piece

520104

10 mm

211.88

per Piece

520105

12 mm

299.44

per Piece

Direction of infeed	horizontal, oblique and vertical
Shank	DIN 6535 HA to h6
Balance quality with shank	G 2.5 with HA
Flute length Lc	19 mm
Overhang length L₁ incl. recess	73 mm
Recess ⌀ D₁	11 mm
Overall length L	120 mm
Shank ⌀ Ds	12 mm
Shank form	HA
Corner chamfer width at 45°	0.2 mm
Corner chamfer angle	45 Grad
Feed fz for slot milling in short-chipping aluminium	0.07 mm
Feed fz for side milling in short-chipping aluminium	0.09 mm
Correction factor fz	1.25
Cutting depth ap min	0.1 mm
maximum cutting depth ap max when side milling	19 mm
maximum cutting depth ap max when slot milling from solid	6 mm

520106

16 mm

657.25

per Piece

520107

20 mm

841.02

per Piece